Connecting To Video Input Connectors - Omron NS12-TS00 Setup Manual

3-7 Installing the Video Input Unit
3-7-4

Connecting to Video Input Connectors

Use the following method to connect cameras to the Video Input Unit mounted to the PT.
Note
● Connecting to Video Input Connectors
1. Insert the BNC socket on the camera's video output cable into a video input connector.
2. After inserting the BNC socket, twist it clockwise until it locks into place
3-34
The tensile load of the cable is 30 N maximum. Do not exceed maximum load.
Video input connectors
Twist clockwise.
Protuberance
BNC socket
Insert the BNC socket so that
the groove is aligned with the
protuberance.