Connecting To Bar Code Readers; Connection Methods - Omron NS12-TS00 Setup Manual

3-4 Connecting to Bar Code Readers

3-4 Connecting to Bar Code Readers

Connecting a Bar Code Reader to the PT allows bar code data to be read as character
strings in the character string input areas.
For details on methods for inputting character strings from a Bar Code Reader, refer to 3-6
Inputting Numeral and Character Strings in the Programming Manual.
3-4-1

Connection Methods

Connect the Bar Code Reader to either serial port A or B of the PT as shown in the following
diagram.
9-pin connector
Recommended Bar Code Reader:
V520-RH21-6, manufactured by OMRON.
Note
Prepare the connecting cables, referring to Appendix 7 Preparing Connecting Cables for Bar
Code Readers.
Reference
3-12
PT
Serial port A or B
(RS-232C, 9-pin)
Connecting cable
Always turn OFF the power to the Bar Code Reader and the PT before connecting or discon-
necting cables.
Bar Code Readers cannot be connected to both serial ports A and B at the same time.
Bar Code Reader
Bar Code Reader cable