Terminology - Omron NS12-TS00 Setup Manual

Terminology

PT
NS Series
PLC
CS/CJ Series
C Series
CVM1/CV Series
Serial Communications Unit
Serial Communications
Board
Communications Board
CPU Unit
NS-Designer
Host
Programming Manual
8
The following terminology is used in this manual.
In this manual, indicates an NS-series Programmable Terminal.
Indicates products in the OMRON NS@ @ Series of Programmable Terminals.
Indicates a Programmable Controller in the OMRON SYSMAC CS/CJ, C, or
CVM1/CV Series of Programmable Controllers.
Indicates Programmable Controllers in the OMRON SYSMAC CS/CJ Series of
Programmable Controllers: CS1G, CS1H, CS1G-H, CS1H-H, CJ1G.
Indicates products in the OMRON SYSMAC C Series of Programmable
Controllers: C200HS, C200HX(-Z), C200HG(-Z), C200HE(-Z), CQM1, CQM1H,
CPM1A, CPM2A, CPM2C.
Indicates products in the OMRON SYSMAC CVM1/ CV Series of Programmable
Controllers: CV500, CV1000, CV2000, CVM1
Indicates a Serial Communications Unit for an OMRON CS/CJ-series PLC.
Indicates a Serial Communications Board for an OMRON CS-series or CQM1H
PLC.
Indicates a Communications Board for an OMRON C200HX/HG/HE(-Z) PLC.
Indicates a CPU Unit in the OMRON SYSMAC CS/CJ, C, or CVM1/CV Series of
Programmable Controllers.
Indicates the OMRON NS-Designer (NS-NSDC1-V@ ).
Indicates the PLC, IBM PC/AT or compatible computer, or personal computer
functioning as the control device and interfaced with the NS-series PT.
Indicates the NS Series Programming Manual (V073-E1-@).