GT Panel System Menu
3.5 DIP Switch Settings to Prevent System Menu Display
All GT models except GT707
Set DIP switch 2 to ON to prevent the system menu from being displayed, e.g. to prevent
unauthorized personnel from changing the GT configuration settings. For GT703 and GT704,
the Ethernet port can be disabled by turning on DIP switch 3 only.
GT707
The DIP switches are located on the back under the battery cover. Set DIP switch 2 to ON to
prevent the system menu from being displayed, e.g. to prevent unauthorized personnel from
changing the GT configuration settings.
Please refer to the section "Operation Mode Setting Switches" in the GT707
hardware manual to for further information.
48
GTWIN Reference Manual