System Settings Tool; Introduction - Panasonic HM500 Series Instruction Manual

System settings tool

13. System settings tool

13.1 Introduction

The panels have a system settings tool to allow basic and preliminary settings. The system settings
tool comes in the shape of a rotating menu with navigation buttons at the top and the bottom to move
between the available options. The tool is shown in the picture below.
On the left side, a component or functions is highlighted. The right side shows information about the
current version, when applicable. The picture below shows the version of the Main OS component.
The system settings tool has two operating modes:
•
User mode and
•
System mode.
The difference between them is only in the number of available options.
To activate the system settings in user mode, you need to access the context menu by touching and
holding any unused area of the touchscreen for a few seconds. The default holding time is 2 seconds
and can be changed.
To activate the system settings in system mode, you need to tap the middle of the touchscreen re-
peatedly at a high frequency while the system is powering up. This only works during power-up.
19