Hmi Device Basic Settings - Panasonic HMWIN User Manual

HMI device basic settings

HMI devices are delivered from factory without Runtime. If no Runtime is installed on the device, see
on page 73 for details.
Runtime modes
The HMI Runtime is composed of two logic units:
Server: runs communication protocols, collects data, monitors alarms, drives trend buffer sampling.
l
Client: displays data collected by server.
l
The server unit is responsible for handling the HMI services such as the communication protocols, performing data
acquisition, driving trend buffer sampling activities, monitoring alarms, and so on.
The client unit is the part which is responsible for the visualization process: use the data collected by the server to render it
on the display as graphical information.
The server unit works in two operating modes:
Configuration mode: server is idle (for example when no project is loaded on the device or some system files are
l
missing).
Operation mode: server is operating according to the settings defined by the system files and by the loaded
l
application project.
Note: Data on client may be displayed even if no activity is running on the server.
Context menu options
On the HMI device press and hold on an empty area of the screen for a few seconds to display the context menu.
Zoom In/Out
Select view size at run time
Pan Mode
Enables/disables pan mode after a zoom in
8
HMWIN Studio | User Manual | v206 (2017-06-30) | EN | © 2014-2017 Panasonic Electric Works Europe AG
HMI device basic settings
"The Runtime loader"