Table of Contents
Advertisement
36 System Settings Tool
The System Settings tool comes with an interface based on a rotating menu, with navigation buttons at the
top and bottom to scroll between the available options. The tool is shown in the figure below.
On the left side, several components and functions are highlighted and, for each of them, the right side
("Info" pane) shows the information about the current version (when applicable). In the picture below, the
version of the Main OS component is shown.
Figure 308
System Settings tool has two operating modes:
User Mode
System Mode.
The difference between them is the number of available options.
36.1 User Mode
User mode is a simple interface where users can get access to the basic settings of the HMI panel.
The System Settings tool is accessible at Runtime from the context menu by selecting the item Show
system settings. When activated in this way, the System Settings tool always starts in User Mode.
The context menu can be activated by pressing and holding down a screen area without buttons or other
touch sensitive elements, until the menu is displayed.
Main Items available in User Mode are:
Calibrate Touch
Display settings
ACGM0195V1EN
HMWIN Studio User Manual
To calibrate the touch screen if needed
Backlight and Brightness control
297
Advertisement
Table of Contents
