Fortinet FortiGate 1U Quick Start Manual page 67

Creating a packet capture
filter
Go to System > Network > Packet
Capture.
Create a new filter. In this example, the
FortiGate unit will capture 100 HTTP packets
on the internal interface from/to host
192.168.1.200.
Host(s) can be a single IP or multiple
IPs separated by comma, IP range, or
subnet.
Port(s) can be single or multiple
separated by comma or range.
Protocol can be single or multiple
separated by comma or range. Use 6 for
TCP, 17 for UDP, and 1 for ICMP.
Starting the packet capture
Select Start to begin the packet capture.
Using an internal computer, or a device set to
IP address 192.168.1.200, surf the Internet to
generate traffic.
Adding packet capture to help troubleshooting 47