Fortinet FortiGate 1U Quick Start Manual page 173

Connecting the FortiAP unit
to the corporate FortiGate
unit
Insert the Ethernet cable provided into the
FortiAP unit's WAN port.
Connect the Ethernet cable to an internal
port on your FortiGate. You may use a
different port but, for ease of use, an internal
port is preferred.
Configure the port by going to System >
Network > Interfaces. Set the Addressing
mode to Dedicate to FortiAP.
Go to WiFi Controller > Managed Access
Points > Managed FortiAP. The FortiAP
unit should be listed.
There will be an orange question mark icon
listed under State. Right-click on the icon
and select Authorize.
Now that the FortiAP unit is authorized, the
icon will change to a green checkmark.
Providing remote users access to the corporate network and Internet 153