Table of Contents
Advertisement
Results
On the PC that you used to connect to the
FortiGate internal interface, open a web
browser and browse to any Internet website.
You should also be able to connect to the
Internet using FTP or any other protocol or
connection method.
Go to Policy > Monitor > Session Monitor
to view the sessions being processed by the
FortiGate unit.
If a FortiGate unit operating in Transparent
mode is installed between a DHCP server
and PCs that get their address by DHCP,
you must add a security policy to allow the
DHCP server's response to get back
through the FortiGate unit from the DHCP
server to the DHCP client. The internal to
wan1 policy allows the DHCP request to
get from the client to the server, but the
response from the server is a new session,
not a typical response to the originating
request, so the FortiGate unit will not
accept this new session unless you add a
wan1 to the internal policy with the
service set to DHCP.
16
The FortiGate Cookbook 5.0.
Advertisement
Table of Contents
