Fortinet FortiGate 1U Quick Start Manual page 207

Go to Router > Static > Static Routes.
Create a route for IPsec traffic, setting
Device to the VPN Phase 1.
Results
Go to VPN > Monitor > IPSec Monitor to
verify the status of the VPN tunnel. It should
be up.
A user on either of the office networks should
be able to connect to any address on the
other office network transparently.
From the HQ FortiGate unit go to Log &
Report > Traffic Log > Forward Traffic to
verify that both inbound and outbound traffic
is occurring.
To verify traffic on the Branch FortiGate unit
as well, go to Log & Report > Traffic Log >
Forward Traffic.
Using IPsec VPN to provide communication between offices 187