Appendix C - Connecting A Modem To Sk-Acpe - Secura Key SK-ACPE User & Installation Manual

SK-ACPe
APPENDIX C
CONNECTING A MODEM TO SK-ACPE
The SK-MDM (U.S. Robotics) has been preconfigured to work with Secura Key access control systems
and SK-NET-MLD software. (NOTE: SK-NET-DM and the free download version of SK-NET™ do not
support modem connections.) NOTE: This modem requires version 3.0 or later of SK-NET-MLD software.
1. Plug the telephone cable provided into the SK-MDM and into the jack for a dedicated phone line.
2. Plug the serial cable (provided) into the DB25 outlet on the SK-MDM.
3. Connect the serial cable wires to the J-7 connector on the SK-ACPE.
4. Connect the modem power supply to the SK-MDM and plug into a 110VAC wall outlet.
5. For added protection, the modem power lines, the phone line connection and the serial
connection may be connected to suitable surge suppressors.
6. Establish connection from the computer to the access control system using SK-NET-MLD software.
(Follow instructions in the SK-NET™ manual.)
reMOTe SiTe MODeM CONfigurATiON WiTH SK-ACPe
TELCO
LINE
Warranty: While Secura Key will be happy to help with modem-related problems, for best results
contact a U.S. Robotics Service Center. To locate a convenient Service Center, go to www.usr.com.
U.S. Robotics warrants this product for two years (detailed warranty is enclosed with the modem).
InStAllAtIon & oPerAtIng MAnuAl
PANEL
1
2
3
4
5
SK-ACPE
SK-MDM
MODEM
RS-232
GATEWAY
Figure C-1
WIRE
DB 25
COLOR
BLACK 7
WHITE 3
RED 8
GREEN 4
ORANGE 2
SK-ACPE
RS-485
NETWORK
Up to 100 SK-ACPE's
C-1
SK-ACPE