Factory Settings - Secura Key SK-ACPE User & Installation Manual

SK-ACPe
When shipped from the factory, the SK-ACPE has the following settings:
* Common to Panel, all other settings are per reader (2 readers per panel)
InStAllAtIon & oPerAtIng MAnuAl

FACTORY SETTINGS

Facility Code
All Cards
Settings
Time Zones
Door Zone
Holidays
Daylight Savings
Correction
Inputs 1
2
Auxiliary Output
Anti-Passback Parameters
Reader (In/Out)
Daily APB Forgive Hour
None*
Time Zone 0 (void)
No Limited Use Cards
Latch timer = 1 Second
APB Timer = 0 Minutes (off)
Baud Rate = 38,400*
Reader ID = (none)
Password = 12345*
Date = Undetermined*
Time = Undetermined*
APB = Timed Hard*
Date Restrictions = None
0 = Always Void
1 = Always Valid (no restriction)
2 = Mon - Fri, 8am - 5:30pm
3 = Mon - Fri, 6am - 6pm
4 = Sat & Sun, 24 hours
5 = Sat & Sun, 6am - 6pm
6 = Always Valid (Timed Antipassback)
7 & Up = Mon-Sun, 6am - 6pm
Off For All Time Segments
None Set
Automatic*
Door Monitor
Disabled
Disabled
None
00
11