Secura Key SK-ACPE User & Installation Manual page 19

SK-ACPe
MULTI-PANEL SYSTEM USING SK-NET
NOTE: SK-NET-MLD software must be used when connecting more than one Connection Group.
NETWORK
SK-NeT TM
SOfTWAre
NeTWOrK CABLe:
1
RS-485 communications. Suggested cable: CAT 5
network cable or Two Twisted Pair. Total system cable
length: 4,000 ft.
SeriAL CABLe:
2
RS-232 communications. Suggested cable: 6-Conductor,
Shielded, with no twisted pairs. PC or serial printer. Total
cable length 100 feet. NOTE: Same wire to be used
for connection from SK-ACPE to reader. Total cable
length 500 feet.
eTHerNeT CABLe:
3
Standard Ethernet cable connector connected to
existing LAN.
NOTe: Each SK-ACPE above can support 2 Wiegand output card readers.
InStAllAtIon & oPerAtIng MAnuAl
SOFTWARE- SINGLE LOCATION WITH LAN CONNECTION
TM
3 DAISY CHAIN / MULTIDROP
SK-ACPE
* See Appendix D for printer configuration.
Figure A-3
STAR /
FANOUT
SK-ACPE
SK-ACPE
1
SK-ACPE
SK-ACPE
STUBBED
SK-ACPE
MONITORS ALL SYSTEM
A-3
"T"
CONFIG
SK-ACPE
SK-ACPE
SK-ACPE
SK-ACPE
SK-ACPE
2
SERIAL PRINTER
ACTIVITY*
1