Secura Key SK-ACPE User & Installation Manual page 20

SK-ACPe
APPeNDiX B
EQUIPMENT:
SK-ACPe:
Two Door Access Control Unit with Ethernet connector
READERS/CARDS:
rK-WM or rK-WS or rK-Wl
Proximity Readers (2 per SK-ACPE)
rKCM-02 Molded Proximity Cards
Specify Quantity
or RKKT-02 Key Tags
or RKCI-02 ISO Image-able cards
et4-WXM, et4-WXS, et8-ro-W-D, or et8-ro-W-M
Contactless Smart Card Reader (2 per SK-ACPE)
etCI ISo Image-able Contactless Smart Cards
Specify Quantity
or ETST Key Tags
SOFTWARE:
SK-NET™ — Basic Software
SK-NET™ -MLD — Multi-Location Dial-Up Software
SK-NET™ -MLD — C/S 2, 5,10,15
Client/Server Software for Multiple Workstations
InStAllAtIon & oPerAtIng MAnuAl
SYSteM CoMPonentS
ACCESSORIES:
net-ConV-P — RS-232 to RS-485 Converter with
Power Supply - one required per system (unless using
a gateway connection)
rS-232e— Serial Cable Assembly
For Bench Testing or field connection with a laptop
SK-MDM — Modem - 56K Baud External Modem for
dial-up connection to any SK-ACPE with MLD software
SK-Plug9 — Computer connector (DB9) with wire pigtail.
SK-ACPe-PS — Transformer and stand by battery for
SK-ACPE.
SK-XFrMr – 16.5VAC 40VA Transformer for
SK-ACPE-LE.
SK-uSB– Converts USB Port at PC to serial COM Port
with DB9 connector
SK-WlSe-MoD – Wireless LAN adapter, 802.11 b/g.
Powered by SK-ACPE-LE. Connect at J12 and set
jumpers.
SK-tS-CP – Enclosure tamper switch. Connect to
tamper input, J7 pin 1 & 6.
SK-24VDC–24 VDC Plug-In Power Supply, 1A
DtK-Cr – Surge protection for card readers and keypads
DtK-Xr – Surge protection for power, data and
phone lines
B-1