Table of Contents
Advertisement
8. Upgrading Firmware
You can upgrade the Firmware using the IP Utility software included in the software CD or from the
Website of Everfocus (click
1.
Install and then start the IPU program
automatically search the IP devices connected in the LAN.
2.
Log in the camera by checking the desired model and then click the Log in
box appears.
3.
Type the Username and Password. Click the OK button, the Login status displays.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able to
log in several cameras at once.
3. Up to 10 cameras can be simultaneously upgraded to the latest firmware. If you connect the
cameras to a PoE switch, please make sure the Power Consumption of the PoE switch is
sufficient.
4.
Click the Upgrade Firmware button
5.
Select the firmware file (.evb) and then click Open. The IPU will automatically upgrade the firmware.
The camera will reboot once the upgrade process is complete.
here
to download).
, the following IPU window appears. The IPU will
, a browsing window appears.
12
EPN4230d/4230di
icon. The Log in dialog
Advertisement
Table of Contents
