Table of Contents
Advertisement
Installing Outdoor Models (EPN4230d)
Two mounting types are available for the outdoor models: Wall Mount and Ceiling Mount.
Wall Mount
1. Drill 4 screw-depth holes for the bracket base plate and then drill a through-wall hole for the camera
cables. You can optionally drill a second through-wall hole to separate cable feeding (see Step 4).
2. Attach the waterproof silicon pad to the bracket base plate for waterproofing.
Waterproof
silicon pad
3. Feed the camera's cables through the conduit in the wall mount bracket.
4. Connect the camera's cables to the related devices. Feed the cables of the related devices, such as the
speaker, through the wall and then through the holes of the bracket base plate.
5. Screw the bracket base to the wall using the 4 screws.
6. Screw the wall mount bracket to the bracket base using the 4 long screws.
7. Put on the supplied gloves. Line up the red triangles
top housing. Push the main body upward into the top housing until the orange catches on both sides
click into position.
Main Body
Note: To release the main body, press the two orange release buttons on both sides.
8. Screw the housing cover to the top housing slowly by twisting it clockwise.
Bracket base plate
Top Housing
and then push the main body upward to the
5
EPN4230d/4230di
Advertisement
Table of Contents
