EPN4230d/4230di
Replacing the Desiccant Bags / Inserting a Micro SD Card
Before installing, insert a micro SD card into the main body and replace the desiccant bags inside the top
housing. It is highly recommended to replace the desiccant bags every time when you open the camera.
To replace the desiccant bags:
1. On the Top Housing, slightly press the black plastic socket backward and lift up the base board.
2. Remove the desiccant bags from the top housing.
3. Stick the supplied 3 new desiccant bags inside the top housing. Place back the base board.
Note: Ensure Not to place the desiccant bags under the position of the fan.
To insert a micro SD card:
1. Unscrew the four screws on the camera main body to remove the black housing.
2. Insert the micro SD card to the card slot. Screw back the black housing.
4