Nokia 6111 RM-82 Service Manual page 94

Nokia Customer Care
Page 4 –10
FPS-8
The Flash Prommer FPS-8 is used with e.g. DA-8 and JVB-1. Power is
supplied to FPS-8 from the Universal Power Supply.
Also included in the sales pack:
• ACF-8, AC charger
• CA-10 DS, Printer cable
• AXS-4, D9-D9 cable
JBV-1
The JBV-1 docking station is a general tool that has been designed for
calibration and software update use. The JBV-1 is used together with
a docking station adapter as one unit
In calibration mode the JBV-1 is powered by an external power supply:
11-16V DC. When flashing the power for the phone must be taken from
the flash prommer.
Note: JBV-1 main electrical functions are:
• adjustable VBATT calibration voltage, current
measurement limit voltage: VCHAR, current measurement:
ICHAR
• adjustable ADC calibration voltage via BTEM and the BSI
signal
• BTEMP and BSI calibration resistor
• signal from FBUS to the phone via the parallel jig
• control via FBUS or USB
• Flash OK/FAIL indication
MJ-58
The MJ-58 module jig is used for testing the following modules:
• User interface
• Baseband and RF on system module
Note: The nominal supply voltage for MJ-58 is +6.0 V. The
supply voltage must not exceed +12.0 V (min. 5.0 V).
Supply the power to the jig only when the jumper is open =
regulated.
RF loss in MJ-58:
• GSM 900: 0.3 dB
• GSM 1800/1900: 0.6 dB
• Bluetooth: <1 dB
Spare pins:
• DE-50-T45 (5pcs)
• 100-GSS-19-3.8-G (5pcs)
• LCR 100 (2pcs)
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Service tools and concepts
FLASH prommer
Docking station
Module jig
RM-82
Issue 1