Module Jig Flash Concept With Fps-8 - Nokia 6111 RM-82 Service Manual

RM-82
Service tools and concepts
JBV-1 input voltage: normal +12V, maximum +16V.
Item Type
1 JBV-1
2 DA-48
3 CA-52PS
4 PCS-1
5 DAU-9S
6 PKD-1
7

Module jig flash concept with FPS-8

Flashing with MJ-58 is recommended in local mode.
The following equipment is required for the AMS software update when the system module is placed in the
module jig MJ-58 and connected through an FPS-8 set-up:
Issue 1
Figure 80 JBV-1 service concept
Description
Docking station
Docking station adapter
Service battery cable
Power cable
MBUS cable
Software protection key
Computer with Phoenix SSW
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Nokia Customer Care
Page 4 –21