Nokia 6111 RM-82 Service Manual page 123

RM-82
Disassembly and reassembly instructions
2. Round the main flex over your finger and fit the UI board assembly with the main flex connector
together.
3. Hold the UI board assembly and the slide assembly at the top together. Move them both slowly to the
shown direction.
4. When moving the slide assembly, be careful not to damage the main flex.
5. When the slide assembly reaches the end, the UI board assembly, automatically closes the rest.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Nokia Customer Care
Page 5 –15