Nokia Customer Care
Page 4–6
CA-35S
The power cable CA-35S is used to power up the interface adapter SS-46.
CU-4
CU-4 is a general service tool used with a module jig and a flash adapter.
CU-4 requires an external 12 V power supply.
The unit has the following features:
• software controlled via USB
• EM calibration function
• Forwards FBUS/Flashbus traffic to/from terminal
• Forwards USB traffic to/from terminal
• software controlled BSI values
• regulated VBATT voltage
• 2 x USB2.0 connector (Hub)
• FBUS and USB connections supported
DKU-2
TM
USB to Pop-Port
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Service Tools and Service Concepts
Power cable
Control unit
USB connectivity cable
connector cable.
RM-57/58
Issue 1