Nokia RM-57 Service Manual page 67

RM-57/58
Service Software Instructions
3. Read the disclaimer text carefully and click Yes.
4. Choose destination folder.
The default folder C:\ProgramFiles\Nokia\Phoenix is recommended.
5. To continue, click Next.
You may choose another location by selecting Browse (not recommended).
6. Wait for the components to be copied.
The progress of the setup is shown in the Setup Status window.
7. Wait for the drivers to be installed and updated.
The process may take several minutes to complete.
If the operating system does not require rebooting, the PC components are registered right away.
If the operating system used requires restarting your computer, the Install Shield Wizard will tell you about
it. Select Yes... to reboot the PC immediately and No.. to reboot the PC manually afterwards.
After the reboot, components are registered and Phoenix is ready for use.
Note: Phoenix does not work, if components have not been registered.
Issue 1
Figure 3 Disclaimer text
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 3–7