Rf Channel Filter Calibration; Temperature Sensor Calibration - Nokia RM-57 Service Manual

RM-57/58
RF Troubleshooting and Manual Tuning Guide
Changed component
Any component in the GSM TX RF chain before the PA
Any component in the GSM TX RF chain after the PA
or PA
Any component in the GSM RX chain
VCTCXO (G7501)

RF channel filter calibration

Context
Rx channel filter calibration tunes Rx and Tx ASICs' internal low pass filters that limit the bandwidth of BB IQ
signals.
Tx filter
Rx filter
Steps
1. From the dropdown menus, set "System mode" to "Local".
2. From the Tuning menu, choose RF Channel Filter Calibration.
3. Click Tune.
4. Click Write.
Saves tuned values to the PMM area.
5. To close the tuning window, click Close.
Results

Temperature sensor calibration

Context
There is a temperature sensor integrated into VINKU ASIC. VINKU provides DC-voltage, which is temperature
dependent.
Issue 1
Table 13 RF channel filter calibration tuning limits
Min
0
0
Figure 69 RF channel filter calibration typical values
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Perform following tunings
Tx IQ Tuning, Tx Power Level Tuning
Tx Power Level Tuning
Rx Calibration, RX Band Filter Response
Compensation, RX AM Suppression
Rx Calibration (GSM850 band)
Typ
5
11
Nokia Customer Care
Max
31
31
Page 7–19