Cisco Catalyst 3560-X Software Configuration Manual page 44

Software Features
• •
•
Note
The switch has these features:
Note
•
•
•
The switch has these features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Deployment Features
•
•
•
Deployment Features
• •
•
•
•
•
•
•
•
•
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-2
IP Base feature set—Provides Layer 2+ and basic Layer 3 features (enterprise-class intelligent IP Services feature set—Provides a richer set of enterprise-class intelligent services and full IPv6
services). These features include access ACLs, QoS, static routing, EIGRP stub routing, PIM stub support. It includes all IP Base features plus full Layer 3 routing (IP unicast routing, IP multicast
routing, the Hot Standby Router Protocol (HSRP), Routing Information Protocol (RIP), and basic routing, and fallback bridging). The IP Services feature set includes protocols such as the Enhanced
IPv6 management. Interior Gateway Routing Protocol (EIGRP) and the Open Shortest Path First (OSPF) Protocol. This
feature set also supports all IP Service features with IPv6 routing and IPv6 ACLs and Multicast
IP Services feature set—Provides a richer set of enterprise-class intelligent services and full IPv6
Listener Discovery (MLD) snooping.
support. It includes all IP Base features plus full Layer 3 routing (IP unicast routing, IP multicast
routing, and fallback bridging). The IP Services feature set includes protocols such as the Enhanced
Interior Gateway Routing Protocol (EIGRP) and the Open Shortest Path First (OSPF) Protocol. This
Unless otherwise noted, all features described in this chapter and in this guide are supported on
feature set also supports all IP Service features with IPv6 routing and IPv6 ACLs and Multicast
all feature sets.
Listener Discovery (MLD) snooping.
Unless otherwise noted, all features described in this chapter and in this guide are supported on
Deployment Features, page 1-2
all feature sets.
Performance Features, page 1-4
Management Options, page 1-6
Manageability Features, page 1-7
Deployment Features, page 1-2
Availability and Redundancy Features, page 1-9
Performance Features, page 1-4
VLAN Features, page 1-10
Management Options, page 1-6
Security Features, page 1-10)
Manageability Features, page 1-7
QoS and CoS Features, page 1-15
Availability and Redundancy Features, page 1-9
Layer 3 Features, page 1-16
VLAN Features, page 1-10
Power over Ethernet Features, page 1-17
Security Features, page 1-10)
QoS and CoS Features, page 1-15
Layer 3 Features, page 1-16
Power over Ethernet Features, page 1-17
Monitoring Features, page 1-18
Express Setup for quickly configuring a switch for the first time with basic IP information, contact
information, switch and Telnet passwords, and Simple Network Management Protocol (SNMP)
information through a browser-based program. For more information about Express Setup, see the
getting started guide.
Express Setup for quickly configuring a switch for the first time with basic IP information, contact User-defined and Cisco-default Smartports macros for creating custom switch configurations for
information, switch and Telnet passwords, and Simple Network Management Protocol (SNMP) simplified deployment across the network.
information through a browser-based program. For more information about Express Setup, see the
Auto Smartports Cisco-default and user-defined macros for dynamic port configuration based on the
getting started guide.
device type detected on the port.
User-defined and Cisco-default Smartports macros for creating custom switch configurations for
AutoSmartport enhancements, which add support for global macros, last-resort macros, event
simplified deployment across the network.
trigger control, access points, EtherChannels, auto-QoS with Cisco Medianet, and IP phones.
Auto Smartports Cisco-default and user-defined macros for dynamic port configuration based on the
AutoSmartPort enhancements in Cisco IOS Release 12.2(55)SE, which adds support for macro
device type detected on the port.
persistency, LLDP-based triggers, MAC address and OUI-based triggers, remote macros as well as
AutoSmartport enhancements, which add support for global macros, last-resort macros, event for automatic configuration based on these two new device types: Cisco Digital Media Player (Cisco
DMP) and Cisco IP Video Surveillance Camera (Cisco IPVSC). trigger control, access points, EtherChannels, auto-QoS with Cisco Medianet, and IP phones.
AutoSmartports enhancement to enable auto-QoS on a CDP-capable Cisco digital media player.
Auto Smartport features in Cisco IOS Release 15.0(1)SE with improved device classification
capabilities and accuracy, increased device visibility, and enhanced macro management. The device
classifier is enabled by default, and can classify devices based on DHCP options.
Chapter 1 Overview
OL-25303-03