installation
FACEPLATE INSTALLATION
Install the faceplate to the unit by hooking the left and right side mounting brackets into the mounting slots at the side of the firebox as shown
below. It is recommended that you use the first mounting slot (the one closest to the door frame overlay) out of the 3 so that the faceplate
and door frame overlay are flush with one another. See diagram below.
NOTE: There are 3 mounting slots available, this is to accommodate any finishing that protrudes slightly beyond the faceplate.
Warning: Turn off the unit by way of the on/off switch on the wall mounted battery holder or remote.
Allow unit to cool at least 10 min. - prior to removing the faceplate.
46
|
Regency Ultimate ™ U900E Gas Fireplace
Diagram 1 - Contemporary Faceplate Install