Wiring Diagram - Regency U900E-NG Owners & Installation Manual

installation

WIRING DIAGRAM

WARNING:
Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding) plug
for your protection against shock
hazard and should be plugged
directly into a properly grounded
three-prong receptacle. Do not
cut or remove the grounding
prong from this plug.
DISCONNECT POWER SUPPLY TO UNIT PRIOR
TO WORKING ON ELECTRICAL COMPONENTS.
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
40 | Regency Ultimate ™ U900E Gas Fireplace
This heater does not require a 120V A.C. supply
for operation. In case of a power failure, the re-
mote control/thermostat will continue to operate.
However, a 120V A.C. power supply is needed
for the fan/blower operation.
CAUTION:
Ensure that the wires do
not touch a hot surface and are away
from sharp edges.
Note:
4 AA Batteries must be installed into the wall
mounted battery holder, however for this unit to
operate when power is lost. See battery back
up instructions in this manual. The fan will not
operate during a power outage.