Horizontal Vent Deflector Installation - Regency U900E-NG Owners & Installation Manual

HORIZONTAL VENT DEFLECTOR INSTALLATION

Note: This installation is only required for horizontal terminations. If any
rise is used when venting this unit - the deflector and extender are
not required.
1. The deflector and extender are shipped on top of the firebox.
2. Install the vertical section of the deflector to the top of the firebox with 3
screws as shown below.
Deflector vertical section
3. Install the horizontal section of the deflector to the vertical section at the
desired height with 2 screws.
4. If the deflector extender is required, install with 2 screws, extend to desired
length before tightening screws.
5. If there is any excess material on the horizontal section of the deflector, it
can be folded down at the fold lines.
Regency Ultimate ™ U900E Gas Fireplace
installation
Deflector horizontal section
Deflector extender
| 15