Fitting The Handlebar; Assembling The Cutting Equipment - McCulloch B33 P Operator Instructions Manual

Sharpening grass cutters and grass
blades
See the cutting attachment packaging for correct
sharpening instructions. Sharpen blades and cutters
Sharpen all edges equally to maintain the balance of
the blade.
a
WARNING:
blade so that it can be reused. Only use original
Trimmer head
IMPORTANT: Always ensure the trimmer line
is wound tightly and evenly around the drum;
otherwise the unit may generate vibration which
could be harmful.
Smaller units generally require small trimmer heads

Fitting the handlebar

1.
Put on the harness and hang the unit from the
support hook.
3.
the harness.
4. Tighten all fasteners securely.
resistance of the grass being cleared.
The length of the trimmer line is also important. A
a shorter trimmer line of the same diameter.
Make sure that the cutter on the trimmer guard is
intact. This is used to cut the trimmer line to the
correct length.
To increase the life of the trimmer line it can be soaked
tougher so that it lasts longer.
ASSEMBLY
Assembling the safety guard

Assembling the cutting equipment

a
WARNING:
it is extremely important that the raised section on
in the center hole of the cutting attachment. If the
6