Table of Contents
Advertisement
Operator's Handbook
Problem
Printer will not print.
Print has voids or is too
light.
Lock up occurs when you
enter FORMAT 100-109
52
Corrective Action
Turn the power off and switch to a
fully charged handle.
Make sure the supplies are loaded
correctly.
Make sure the supplies are loaded
correctly.
Make sure both sides of the platen
carrier are closed.
Turn the power off and switch to a
fully charged handle.
Clean the print head per
maintenance instructions.
= 3
Press
to clear the display.
Re-enter the correct format number.
Advertisement
Table of Contents
Troubleshooting
