Use isopropyl alcohol only on the interior areas, never on
the exterior parts of the printer. DO NOT use silicon to
clean or lubricate.
4. Lightly moisten a soft cloth with alcohol.
5. Clean the print head area (Figure 12) of all adhesive and
label particles.
6. Also clean the platen roller and other surfaces that are
shown. Special instructions are included in the 6076
Cleaning Kit.
Latch
Button
7. Press both sides of the platen carrier closed.
CAUTION
Figure 12
5. Care and Maintenance
Platen Carrier
Platen
Roller
Print
Head
Label
Chute
45