Paxar TC6021OH Operator's Handbook Manual page 56

Operator's Handbook
Messages (continued)
Message
OVERHEAT
(when the power is first
turned on)
OVERHEATED-WAIT
(while printing labels)
PAPER JAM
RECHARGE
SERVICE REQUIRED
STRIP LENGTH?
48
Corrective Action
Ensure that you are operating or
storing the printer within the
recommended temperature listed
in the specifications.
Contact Monarch Service.
Let the printer cool for a few
seconds. You don't have to turn the
printer off. When the printer is cool,
the display shows PRINTED. You
may begin printing.
If the message still appears.
Contact Monarch Service.
= 3
Press to clear the message.
Check the label and backing paper
tracks per the maintenance
instructions.
Reload the supplies if necessary.
The label size set in the format does
not match the supply you have
loaded. Load the correct supply.
Turn the power off and replace the
handle with a fully
charged handle.
Recharge the used handle.
Contact Monarch Service.
For offline printing models. Refer to
the Offline Features .