Paxar TC6021OH Operator's Handbook Manual page 18

Operator's Handbook
7. Push the power switch on. The display shows a prompt.
If you don't see the FORMAT? prompt, press
and start the loading procedure from the prompt.
= 4
8. Press
RELOADING
9. Pull the backing paper down between the guides and
against the metal roller (Figure 5).
10. Pull the supply strip until it touches the bottom of the
handle.
Trigger
11. Press both sides of the platen carrier closed.
12. Separate the supplies from the backing paper.
10
. The display shows:
Backing
Paper
Figure 5
Guides
Feed Backing
Paper Here
Labels
(Supplies)
5