Turn Signal Light; Front Fog Light Bulbs - Hyundai Accent 2013 Owner's Manual

Maintenance
■ MFR (Multi Focus Reflector) Headlamp
■ Bi-Function Projection Headlamp

Turn signal light

1. Turn off the engine and open the hood.
2. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
7 82
3. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
ORBC070049
into the assembly and turn the socket
clockwise.
ORB073049
Front fog light bulbs (if equipped)
1. Remove the front bumper under cover.
2. Reach your hand into the back of the
front bumper.
3. Disconnect the power connector from
the socket.
ORBC070030
ORBC070031