Installing A Child Restraint System With A Lap Belt; Installing A Child Restraint System By Lap/Shoulder Belt - Hyundai Accent 2013 Owner's Manual

Installing a child restraint system
with a lap belt (on the center rear
seat) (if equipped)
To install a child restraint system on the
center rear seats, do the following:
1. Place the child restraint system on the
center rear seat.
2. Extend the latch plate tongue of the
lap belt.
3. Route the lap belt through the restraint
according to the seat manufacturer's
instructions.
4. Buckle the seat belt and adjust the lap
belt for a snug hold on the child
restraint by pulling on the loose end of
the belt. After installation of the child
restraint system, try to move it in all
directions to be sure the child restraint
system is securely installed.
E2BLD347
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint
instructions. Be sure the seat belt web-
bing is not twisted.
Safety features of your vehicle
E2MS103005
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
Position the release button so that it is
easy to access in case of an emergency.
manufacturer's
OEN036101
3 27