Auto Light Position; High Beam Operation - Hyundai Accent 2013 Owner's Manual

Features of your vehicle
■ Type A
■ Type B
Auto light position (if equipped)
When the light switch is in the AUTO light
position, the taillights and headlights will
turn ON or OFF automatically depending
on the amount of light outside the vehi-
cle.
4 76
CAUTION
• Never place anything over sensor
(1) located on the instrument
panel. This will ensure better
auto-light system control.
• Don't clean the sensor using a
window cleaner. The cleaner may
leave a light film which could
interfere with sensor operation.
• If your vehicle has window tint or
ORBR043360
other types of metallic coating on
the front windshield, the Auto
light system may not work prop-
erly.
ORBR043359
■ Type A
■ Type B

High beam operation

To turn on the high beam headlights,
push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis-
charged, do not leave the lights on for a
prolonged time while the engine is not
running.
ORBC040049
ORB040049E