Bi-Function Projection Headlamp; Traffic Change (Mfr Headlamp) (For Europe) - For Rhd (Right-Hand Drive) Vehicle; Traffic Change (Bi-Function Projection Headlamp) - Hyundai Accent 2013 Owner's Manual

Maintenance
■ Headlamp (Low beam)
■ Headlamp (High beam)
✽ NOTICE -
Bi-Function
Projection Headlamp
This headlamp is bi-function type that
switches the low beam to high or the
high beam to low to use solenoid system.
So, the moving sound may be heard
when the headlamp switches the low
beam to high or the high beam to low
and these it does not indicate malfunc-
tion of the headlamp.
7 80
❈ Traffic Change (MFR Headlamp) (For
Europe) - for RHD (Right-Hand Drive)
vehicle
The low beam light distribution is asym-
metric. If you go abroad to a country with
opposite traffic direction, this asymmetric
part will dazzle oncoming car driver. To
prevent dazzle, ECE regulation demand
several technical solutions (ex. automatic
change system, adhesive tape, down
ORB073078
aiming). These headlamps are designed
to be masked with adhesive tape accord-
ing to below picture.
60
mm
ORB073079
Right side
❈ Traffic Change

(Bi-Function Projection Headlamp)

The low beam light distribution is asym-
metric.
If you go abroad to a country with oppo-
site traffic direction, this asymmetric part
will dazzle oncoming car driver. To pre-
vent dazzle, ECE regulation demand
several technical solutions (ex. automatic
change system, adhesive sheet, down
aiming). This headlamps are designed
not to dazzle opposite drivers. So, you
need not change your headlamps in a
country with opposite traffic direction.
10
mm
30
mm
60
mm
10
mm
30
mm
Left side
ORBR070101