Fuses - Hyundai Accent 2013 Owner's Manual

Maintenance

FUSES

Blade type
Normal
Cartridge type
Normal
Multi fuse
Normal
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
7 66
This vehicle has 2 (or 3) fuse panels, one
located in the driver's side panel bolster,
another is in the engine compartment.
If any of your vehicle's lights, acces-
sories, or controls do not work, check the
appropriate circuit fuse. If a fuse has
Blown
blown, the element inside the fuse will be
melted.
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, discon-
nect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
Blown
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
the system involved and immediately
consult an authorized HYUNDAI dealer.
Three kinds of fuses are used: blade
type, cartridge type and multi fuse.
Blown
ORB072110
WARNING
- Fuse replace-
ment
• Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
CAUTION
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
✽ NOTICE
The actual fuse/relay panel label may
differ from equipped items.