Fuses - Hyundai ix35 2015 Owner's Manual

Maintenance

FUSES

■ Blade type
Normal
■ Cartridge type
Normal
■ Multi fuse
Normal
■ BFT (Battery fuse terminal)
Normal
7 44
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 3 (or 4) fuse panels, one
located in the driver's side panel bolster,
Blown
the other in the engine compartment
near the battery.
If any of your vehicle's lights, acces-
sories, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will be
melted.
If the electrical system does not work,
first check the driver's side fuse panel.
Blown
Before replacing a blown fuse, discon-
nect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
Blown
the system involved and we recommend
that you consult a HYUNDAI authorised
repairer.
Four kinds of fuses are used: blade type
for lower amperage rating, cartridge type,
and fusible link for higher amperage rat-
ings.
Blown
OLM079051N
WARNING
- Fuse replace-
ment
• Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or aluminium
foil instead of the proper fuse -
even as a temporary repair It may
cause extensive wiring damage
and a possible fire.
CAUTION
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
✽ ✽ NOTICE
The actual fuse/relay panel label may
differ from equipped items.