Table of Contents
Advertisement
Deactivating the anti-lift alarm
Press button
on the roof panel to deactivate the anti-lift alarm
H
system. When this function is deactivated, the indicator light on the
button will flash for about 3 seconds and will then turn off.
H
General
22
Alarm memory
If, when the vehicle is started, the CODE symbol (see page 104)
appears on the left TFT display for 10 seconds after the system
diagnosis cycle, together with the message "Break-in attempted",
this means there has been an attempt to break into the car, causing
the alarm to activate.
In this case, the system will indicate the reason for the alarm
activation according to the following priority:
- LED off twice: anti-lift sensor alarm.
- LED off three times: door alarm.
- LED off four times: luggage compartment lid alarm.
- LED off five times: ignition key alarm.
When the engine is switched on, the alarm system memory is reset.
Advertisement
Table of Contents
