Display setting and configuration of vehicle parameters
Warning
Most of the display settings can only be adjusted and the
parameters configured when the vehicle is stationary. When the
vehicle is in motion, you can only adjust the display brightness
and set the speed limit.
SETUP screen page
Display setting and configuration of the various vehicle parameters
is possible using the MENU screen page (the only screen page in
the SETUP group).
Dimming
Right display
Speedometer
Digital speed
About your Vehicle
86
Navigation within the menu is on several levels; the first level offers
a list of items through which the following parameters can be set or
the following information can be displayed:
- Dimming: display dimming setting.
- Right display: right display setting.
- Date/Hour: date and time setting.
- Language: language setting.
- Unit of measurement: unit of measurement setting.
- Car setup: vehicle parameter configuration.
- Service: information on scheduled maintenance.
- TPMS calibration: TPMS system calibration
These items are the main menu functions. To scroll through the list
of items, press the UP and DOWN buttons; to select the required
function, press and quickly release the OK button or the RIGHT
button.
Once the function has been selected, the individual subfunctions or
parameters that can be activated are displayed. To select them, use
the UP and DOWN buttons and press and quickly release the OK
(or RIGHT) button to activate a subsection or activate the selected
parameter.
To go back to the previous menu level, press the BACK button. If
no operation is performed for at least 10 seconds, the previous
menu level reappears on the display.
Adjusting brightness
The brightness setting of the two TFT displays on the instrument
panel is adjusted from the specific option in the SETUP screen.