Rotating Transmitter Housing; Figure 4: Rotating Transmitter Housing - Honeywell SMV800 Quick Start Installation Manual

SmartLine Multivariable Transmitter

Rotating Transmitter Housing

Use a 2mm hex wrench to loosen the set screw on outside neck of
transmitter one full turn. Rotate the transmitter housing to a maximum of
180 degree increment in left or right direction from center to position you
require and tighten set screw (1.46 to 1.68 Nm/13 to 15 lb-in).
Figure 4 Example – Rotating Transmitter Housing.

Figure 4: Rotating Transmitter Housing

6
Quick Start Installation Guide December 2015