Mounting The Transmitter; Figure 2: Mounting Brackets - Honeywell SMV800 Quick Start Installation Manual

Available communication protocols are Honeywell Digitally Enhanced
(DE) and HART. Digital or Analog (4-20ma) output modes are available.
The SMV800 measures Process Temperature from an external RTD or
Thermocouple.
The device may be configured to map any of the four Process Variable to
the Analog Output (4-20 mA):

MOUNTING THE TRANSMITTER

Transmitter models can be attached to a two-inch (50 millimeter) vertical
or horizontal pipe using Honeywell's optional angle or flat mounting
bracket; alternately you can use your own bracket.
Typical Bracket mounted Installations
4
 Differential Pressure PV1
 Static Pressure PV2
 Process Temperature PV3
 Calculated Flow Rate PV4

Figure 2: Mounting Brackets

Quick Start Installation Guide
SmartLine Multivariable Transmitter
December 2015