Figure 6: Assigning Line Pool To Ip Trunks; Figure 7: Assigning Dn To Line Pool - Nortel BCM50 Configuration Manual

AT&T IP Flexible Reach and AT&T IP Flexible Reach with AT&T Business in a Box
Nortel BCM50 Release 3.0 SIP Configuration Guide
Configuration Telephony Dialing Plan
Under ; select "Line Pools." In
this case we selected "BlocA" under the "Pool" tab. We will use this line pool to
access the VoIP trunks. Additionally, all DN numbers that need to access the
VoIP trunks must be added to this pool. Please see the following screen shots
for an example configuration.

Figure 6: Assigning Line Pool to IP Trunks

Figure 7: Assigning DN to Line Pool

*Nortel, Nortel Networks, Nortel (Logo), the Globemark, CS1000 are trademarks of Nortel Networks.
Issue 1.5 Page 16 of 38