Install Leveling Legs - Whirlpool WED99HEDW0 Technical Education

INSTALLATION
I
I
I
I
I
I
GROUNDING INSTRUCTIONS
GROUNDING INSTRUCTIONS
For a grounded, cord-connected dryer:
I
This dryer must be grounded. In the event of malfunction or
For a grounded, cord-connected dryer:
I
breakdown, grounding will reduce the risk of electric shock
This dryer must be grounded. In the event of malfunction or
by providing a path of least resistance for electric current.
breakdown, grounding will reduce the risk of electric shock
This dryer is equipped with a cord having an equipment-
by providing a path of least resistance for electric current.
grounding conductor and a grounding plug. The plug must
This dryer is equipped with a cord having an equipment-
be plugged into an appropriate outlet that is properly
grounding conductor and a grounding plug. The plug must
installed and grounded in accordance with all local codes
be plugged into an appropriate outlet that is properly
and ordinances.
installed and grounded in accordance with all local codes
WARNING:
and ordinances.
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
WARNING:
Improper connection of the equipment-
Check with a quali ed electrician or service representative
grounding conductor can result in a risk of electric shock.
or personnel if you are in doubt as to whether the dryer is
Check with a quali ed electrician or service representative
properly grounded. Do not modify the plug provided with
or personnel if you are in doubt as to whether the dryer is
the dryer: if it will not t the outlet, have a proper outlet
properly grounded. Do not modify the plug provided with
installed by a quali ed electrician.
the dryer: if it will not t the outlet, have a proper outlet
SAVE THESE INSTRUCTIONS
installed by a quali ed electrician.
SAVE THESE INSTRUCTIONS
n
3-6 HybridCare™ Dryer with Heat Pump Technology

Install Leveling Legs

Install Leveling Legs
Install Leveling Legs
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.