How To Assemble; Connect Hose; Connect Wand; Connect Nozzle - Royal SR30020 Owner's Manual

2. HOW TO ASSEMBLE
WARNING: TO REDUCE THE RISK OF INJURY- UNPLUG CLEANER
BEFORE REMOVING OR INSTALLING HOSE.

2.1 CONNECT HOSE

Push hose connection end (A) into
opening (B) on front of cleaner.
To disconnect hose from cleaner,
press release buttons (C) on sides
of Hose Connector and pull out.
NOTE: The flexible hose contains
electrical wires for connection to
the Power Nozzle and should not be
used if damaged, cut or punctured.

2.2 CONNECT WAND

Push Hand Grip (D) firmly into end
of Wand (E) until Latch clicks. To
remove Wand from Hose, press on
Wand Release Button (F) on end of
Wand and pull apart.

2.3 CONNECT NOZZLE

Push the opposite end of Wand
(G) firmly into Power Nozzle. To
release, step on Wand Release
Pedal (H) and pull to disconnect
from Nozzle.
2.1
C
2.2
D
E
F
2.3
G
H
6
A
B