Continuous Navigation Mode; Gps Receiver Override (Advanced); Si Navigation (Side Imaging View Only) - Humminbird HELIX 5 SI GPS Operation Manual

Continuous Navigation Mode allows you to continue to navigate and fish around a particular
waypoint, even if you pass over it multiple times.
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS
receivers plugged into the system. These multiple GPS receivers may be internal or external. If
you select Auto, your unit will select a GPS receiver automatically.
NOTE: If only one GPS receiver is plugged into your system, then Auto will be the only option shown.
SI Navigation controls how the boat icon is displayed in Side Imaging Views. If SI Navigation is
turned on, the boat icon indicates the direction the boat needs to turn to reach the next
waypoint during navigation. The boat icon color will also change to orange.
If SI Navigation is turned Off, the boat icon will not change during navigation although you can
still mark waypoints and start navigation from a Side Imaging View. See Views: Side Imaging
View and Introduction to Navigation for more information.

Continuous Navigation Mode

Settings: Off, On; Default = Off
GPS Receiver Override
(Advanced)
Settings: Internal, External, Auto; Default = Auto
SI Navigation
(Side Imaging Views only)
Settings: Off, On; Default = On
137
Navigation Menu Tab