Micro Sd Card Slot - Humminbird HELIX 5 SI GPS Operation Manual

Micro SD Card Slot

The Micro SD Card slot on your control head can be used with a Micro SD Card (optional-purchase
required) to add detailed charts to your Fishfinder, import/export navigation data, and save sonar
recordings (see Snapshot and Recording View for details).
NOTE: The Micro SD Card requires a separate purchase. For more information, visit our Web site at
humminbird.com or contact Humminbird Customer Service at 1-800-633-1468.
To insert a Micro SD Card:
1. Remove the Micro SD Card slot cover.
2. Position the Micro SD Card so that the label faces
the front of the control head and the card notches
face down.
3. Insert the card into the slot until it clicks into
place.
4. Replace the slot cover so it is secure.
5. To Remove: Press the card into the slot and then
release. The card will eject, and you can then pull
the card from the slot.
NOTE: Do not leave the Micro SD Card slot cover open. The
slot cover should always be closed to prevent water
damage to the unit.
Inserting a Micro SD Card into the Card Slot
13
Micro SD Card Slot