Clear Current Track; Save Current Route (Only When Navigating); Reset Xte (Only When Navigating); Remove Target (Only If A Target Is Active) - Humminbird HELIX 5 SI GPS Operation Manual

Clear Current Track allows you to clear the current track on the display and start a new track at
the present position.
Save Current Route allows you to save the current route being displayed. This menu option will
only appear when you are currently navigating a route.
Reset XTE is available during navigation. When it is selected, the cross track error (XTE) will be
recalculated from the boat's current position to the next waypoint in the route.
For example, when you've deviated from a route to navigate around an island, select Reset XTE
to update the unit's course calculations from the current boat position instead of from the
previous waypoint in the route.
Remove Target removes the waypoint target from the display. This menu option will only appear
when a target has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for more information.
Remove Grid removes the waypoint grid from the display. This menu option will only appear
when a grid has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for more information.

Clear Current Track

Settings: Press the RIGHT Cursor key and follow screen instructions.
Save Current Route
(only when Navigating)
Settings: Press the RIGHT Cursor key and follow screen instructions.
Reset XTE
(only when Navigating)
Settings: Press the RIGHT Cursor key and follow screen instructions.
Remove Target
(only if a Target is Active)
Settings: Press the RIGHT Cursor key to activate.
Remove Grid
(only if a Grid is Active)
Settings: Press the RIGHT Cursor key to activate.
117
Navigation X-Press Menu