Lat/Lon Grid; Navaids On Bird's Eye View; Chart Select; Set Simulation Position (Advanced) - Humminbird HELIX 5 SI GPS Operation Manual

Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines.
Navaids on Bird's Eye View allows you to display or hide additional navigational aids in Bird's
Eye View, such as lights and buoys.
NOTE: You will see more navigational aids with an optional-purchase Micro SD Card.
Chart Select allows you to choose which chart to use if you have built-in charts or a map card.
If you select Auto, your unit will select a chart automatically (see Micro SD Card Slot: Add Maps
to Your Fishfinder).
NOTE: The Micro SD Card requires a separate purchase. For more information, visit our Web site at
humminbird.com or contact Humminbird Customer Service at 1-800-633-1468.
Set Simulation Position allows you to set the position of the boat used in the Simulator. Press any
arrow on the 4-WAY Cursor Control key to activate the cursor and move it to the coordinates where
you want to start the simulation. Then confirm the position using the Set Simulation menu setting.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
Set Map Offset allows you to change the map offset used by your Fishfinder. Press the 4-WAY
Cursor Control key to activate the cursor and move it to the location where the Map Offset will
be applied. Then, confirm the map offset position using the Set Map Offset menu setting.
The Map Offset will be applied to all maps and not just the map that requires the correction. The Map
Offset should be cleared if a different map is to be used.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
NOTE: This feature does not apply to LakeMaster charts.

Lat/Lon Grid

Settings: Hidden, Visible; Default = Hidden

Navaids on Bird's Eye View

Settings: Hidden, Visible; Default = Visible

Chart Select

Settings: Various; Default = Auto
Set Simulation Position
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Set Map Offset
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
139
Chart Menu Tab